|
|
|
|
|
|
|
Speed mod kit (Eleven-piece set $1250) Available Now. This eleven-piece set includes:
- Wing root fillets
- Horizontal stabilizer fillets
- Flap hinge fairings
- Trim servo fairings
Not only will these reduce the drag on your Legacy for even more cruise speed, they'll give your Legacy a more enhanced aerodynamic look. They really do make the plane! We did all the hard work. You simply bond these parts into position. This mod is perfect for the Legacy FG too.
The response to these parts has been incredible and you can't imagine how well this mod will complete your Legacy until you actually see them on. Click on the image to the left and see how great they look on Carl Lewis' beautifully finished Legacy. These can easily be installed even if your Legacy is finished and flying!
Click here to download an order form and order a set today!
|
|
|
|
Speed mod kit (Four-piece set $975) Available Now. This four-piece set includes:
- Wing root fillets
- Horizontal stabilizer fillets
Click here to download an order form
|
|
 |
|
Integral Wingtip Lights ($795) Available Now
This option includes wingtip lenses and mounting bulkheads and uses the Lancair IV lighting system (purchased separately through Lancair). When installed it removes the undesirable parasite drag and dated look of the stock external lights. It comes with a template and instructions, but you will need to install the Lancair 320 tail light fairing for the rear postion/strobe light. This will fit the Legacy FG too.
Click here to download an order form
|
|
 |
|
Aft Baggage Storage Tube ($925) Call for Availability
This neat little option will allow you to carry oversize items such as golf clubs, fishing rods. It extends the aft storage area so you could toss your canopy cover, pillows, sleeping bags, etc. in the back!
The part is 12" diameter carbon fiber tube (with supports) that attaches to the existing access panel with nut plates. It is approximately 30" in depth and weighs 1.5 lbs. This is ideal for the Legacy FG too.
Click here to download an order form
|
|
 |
|
Winglets ($975) Available Now
Our winglets are visually very appealing. Moreover they are aerodynamically correct, will improve high altitude cruise efficiency & yaw stability in turbulence, most likely will provide a shorter takeoff roll & a greater climb rate, but most of all it gives the Legacy even more of a modern look.
Click here to download an order form
|
|
|
|
|
|
 |
|
Flat-EFIS panel for the Legacy ($300)
(Call 541-408-5106 for availability and to order this item)
This panel was designed and developed by Don Barnes for his Chelton-equipped, award-winning Legacy. It removes the obtrusive hump from the center and allows your EFIS to be installed side-by-side as it should be. A dust cover can also be ordered for an additional $165.00.
This item is being produced and sold by Vern Pifer. Please contact him directly at 541-408-5106 to order. E-mail Vern
|
|
 |
|
EXPERIMENTAL Canopy sticker for the Legacy ($35)
This sticker was designed by Don Barnes and will fit the forward portion of the canopy. Measures 35" wide, curved for a perfect fit and comes in dark gray, light gray or medium brown. (Specify color when ordering).
|
|
|
|
Prepreg Panels
(Call 541-408-5106 for pricing, availability and to order this item)
2250HA....1/4", 2 core 2, 0-90, 38" X 90"
2250HB....1/4", 2 core 2, +-45, 38" X 90"
3000A......3 ply glass (no core)
4000A......4 ply glass (no core)
These items are being produced and sold by Vern Pifer. Please contact him directly at 541-408-5106 to order. E-mail Vern
|
|
 |
|
T-shirt (XL,L, M and S $16) Available Now. Printed on a heavy-weight white crew collar shirt. Price includes shipping.
Click here to download an order form
|
|
|
|
Shipping is included on all orders either UPS ground or USPS in the continental United States.
Click here to download an order form
|
|
|
|
|
